ES1686dc-2145NT-128G
CPU | Intel® Xeon® D-2145NT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller |
CPU Architecture | 64-bit x86 |
Floating Point Unit | |
Encryption Engine | (AES-NI) |
System Memory | 64 GB RDIMM DDR4 ECC (4 x 16 GB) per controller |
Maximum Memory | 512 GB (8 x 64GB) |
Memory Slot | 8 x DDR4 RDIMM/LRDIMM
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
|
Flash Memory | 4GB (Dual boot OS protection) |
Drive Bay | 16 x 3.5-inch
SAS 12Gb/s, backward-compatible to SAS 6Gb/s
|
Drive Compatibility | 3.5-inch bays: 3.5-inch SAS/SATA hard disk drives 2.5-inch SAS/SATA hard disk drives 2.5-inch SAS/SATA solid state drives |
Hot-swappable | |
M.2 SSD Slot | 2 x M.2 port Supports SATA 6Gb/s or NVMe Gen3 x4 2280 |
SSD Cache Acceleration Support | |
Cache for Copy To Flash (C2F) | 1 per each controller (64GB) |
Gigabit Ethernet Port (RJ45) | 3 for each controller (one for remote management) |
10 Gigabit Ethernet Port | 4 x 10G SFP+ for each controller |
Jumbo Frame | |
PCIe Slot | 2 Slot 1: PCIe Gen3 x8 (CPU) Slot 2: PCIe Gen3 x8 (CPU) |
USB 3.0 port | 2 per each controller |
Form Factor | 3U Rack Mount |
LED Indicators | System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection |
Buttons | Power, Reset |
Dimensions (HxWxD) | 132 × 483.05 × 630.62 mm |
Weight (Net) | 25.83 kg |
Weight (Gross) | 32.69 kg |
Operating temperature | 0 – 40 °C (32°F – 104°F) |
Relative Humidity | 5~95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | Redundant/ Hot Swap Power Vin:90~264VAC;770W |
Power Consumption: Operating Mode, Typical | 500.87 W |
Fan | Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3) |
Sound Level | 55.8 db(A) |
Safety Standard | FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD |